Föreliggande rapport är en kortfattad sammanfattning av det examensarbete jagutförde för Perstorp AB under perioden november 1995 ? maj 1996.Examensarbetet gick ut på att utarbeta, dokumentera och bygga upp ettledningssystem för säkerhet, hälsa och miljö (S.H.E.) för sektor Energi inom PerstorpRegeno (Ångcentral, avloppsreningsverk, vattenreningsverk och anläggning förkatalytisk förbränning). Ledningssystemet utarbetades i överensstämmelse med dedirektiv som tagits fram för ledningssystem för säkerhet, hälsa och miljö inomPerstorpkoncernen och även med den då färska ISO 14001-standarden förmiljöledningssystem.Under arbetets gång byggdes en utförlig dokumentation över ledningssystemet, somöverlämnades till mina handledare och min uppdragsgivare i september 1996.Perstorp AB fick då även mitt arbete i elektronisk form. Den dokumentation som togsfram tjänar som en konfidentiell bilaga, som är Perstorp AB:s egendom. I sambandmed att dokumentationen överlämnades till Perstorp AB 1996, fullgjordes åtagandetgentemot företaget.Mitt examensarbete har jag även muntligt presenterats som en ?case study? för hurett miljöledningssystem byggs upp från grunden i samband med att jag gick kursen?3C1380 Miljömanagement? våren 1999..

En kraftig expansion inom Perstorp components de senaste åren, har inneburit att användningen av emballage ökat och därmed också emballagekostnaderna. Målsättningen med föreliggande studie har varit att undersöka om det är möjligt att reduceraemballagekostnaderna genom att införa internemballage.Arbetet delades in i tre faser. Den första var en identifikationsfas där dagens flöden skulle kartläggas. Därefter analyserades flödena och slutligen jämfördes olika emballagealternativ för att utröna vilka alternativ som var mest fördelaktiga.Det vanligast förekommande emballaget i dag kommer från Volvo Transport, som hyr ut emballage. Utöver emballage från Volvo Transport används pallar av olika slag, på vilka vanligtvis lådor av wellpapp placeras.Samtliga flöden som är större än 450 m3 per år, samt mindre flöden som kan inkluderas i de större, analyserades för att undersöka möjligheterna till reduktion av kostnaderna genom införande av internemballage.

Syfte:Syftet är att analysera och beskriva styrsystemets användbarhet utifrån vald organisationsstruktur i ett decentraliserat företag. Problem:Eftersom strategin utgör en grundtanke som ska förena och skapa en gemensam riktning för individer eller organisationer är det en central del av en chefs roll att sträva mot att skapa framgångsrika strategier och att implementera dessa. Enligt forskning kommer företagens diversifieringsstrategier leda till att de decentraliseras och organiserar sig efter divisioner. En decentraliserad, divisionaliserad organisationsstruktur har fördelar men också nackdelar. Eftersom organisationsstrukturen och styrsystemet ska samverka ställer strukturen krav på styrsystemet.

This master thesis reviews advances in detection and diagnosis of static friction (stiction) in control valves. Control valves suffering from stiction results in oscillating control loops which in turn decreases both the process stability and reliability. Perstorp AB sees a necessity to automatically detect stiction in valves before the effects of the malfunctioning valves have become too severe. This thesis presents an introduction to maintenance, control loops and how stiction in valves can affect performance of control loops.A selection of methods presented in the literature are introduced and examined using normal operating data from the site in Perstorp. Common for all selected methods is their intuitive ideas and that they are based on normal operating data and minimum amount of process knowledge.

Vi har fått ett flertal viktiga insikter och lärdomar om nödvändiga ingredienser i god management. Först och främst en förståelse för hur viktigt det är med ökad självinsikt. Därigenom ökar förståelsen för andra personers beteende. Även det omvända gäller; genom andras beteende kan självinsikten öka. Lärdomen har implikationer på alla nivåer av management då en organisation grundar sig på samspelet mellan människor.

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

The purpose of this work is to providing a general set of base classes for building simulators, for example a robot system. Instead of every time building a new simulator from the beginning, you get the already completed components from a library. The library should in that way act as a springboard for development.To do this work, there?s a lot of knowledge required in how a general robot system could look like. Therefore it was necessary to gather some information about robotics.

The Uppsala based company Q-linea develops procedures, instruments and systems for protein and nucleic acid analysis. The components in such an instrument are controlled by microcontrollers. Microcontrollers are computers in one singular chip that can be used in a wide range of applications such as cars, toys or in this case an analysis instrument. When developing a new instrument for biochemical analysis, Q-linea needed new software for controlling and communicating between the components in the instrument. The process of developing this software is the subject of this thesis.The project included research of microcontrollers and the components in the instrument.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

This paper investigates a number of components that influence the relationship between consultant and client in a procurement process of ERP. The paper deals with Trust, Commitment, Cooperation and Satisfaction. The problem lies within the fact that consultants do not know how and to what extent the components affect relationship quality. Based on the theories in the areas of procurement, relationship marketing and relationship quality, information has been gathered about how the various authors believe a procurement process works, how they view relationship marketing and how relationship quality is created. The components discussed are trust, commitment, cooperation and satisfaction.

The industrialization of construction is increasing in Sweden which leads to higher demands of prefabricated components and cells. But what does the business of construction think of the industrialized business and what can be done in order to decrease faults and errors with these products? Today we have many manufacturers who have different technical solutions which might lead to difficulties when assembling components and cells at the building site. But by trying to make a more opened market, with possibly standardized connections details and improving the communication between the different participants, the prefabricated components and cells can be made and assembled with less errors. This is something that needs to be done in order to establish a more secure business, and especially when working with new companies and methods, when using industrialized products..

Rapporten undersöker Volvo Construction Equipment Components axelmontering för axlar till Dumper och Hjullastare. Arbetet har utförts med intervjuer, studiebesök på andra fabriker och en detaljerad studie av monteringsavdelningen och dess angränsande avdelningar vilka levererar artiklar till monteringsstationerna. Undersökningen har resulterat i ett förslag där fördelarna av en stationsbaserad montering och fördelarna med en linjemontering kombinerats. Arbetet presenteras i rapporten och i en dator animerad 3D simulering av förslaget till en ny monteringslayout. Jag anser att Volvo CE Components och montörerna på monteringsavdelningen skulle gynnas av monteringslayouten som redovisas i rapporten..

The aim of this study is to investigate leadership in sports organizations and business organizations. The study focused on common and important leadership components and the most important leadership processes in both business context and sports context. The study also investigated common and important leadership components, leadership challenges and which degree leaders used the transformative leadership. The study focuses on leadership components most importantly from the leaders view, including both sport managers and business leaders. The investigation was based on eight interviews, which are analyzed with content analysis.

In Sweden there are many kinds of effort given youths with behavioral problems, one is institutional care. International research display a varying kind of results from this type of treatment. The aim of this study is to examine and illustrate which central components that results in positive treatment, but also starighten important components in KBT. On the basis of research results, important components for positive treatment have been illustrated as; the therapeutic relationship, the integrity of treatment, prosocial-contacts, positive climate in treatment, the continual of treatment, how to bring treatment to an end, the responsivity principle-the principle of need-the risk principle, learning and KBT.  Research also aims to investigate whether these components could be identified in the daily work of youth treatment on institution. This through a qualitative approach including six interviews held with staff working in treatment facilities.